Follow this operation manual.
Steller applicable model and motherboard version
Printer model: CR-6 SE
Software version v2.0.1.9
Motherboard silk print HW4.5.3 (1.1.0.3)
illustrate:
The firmware raised the version to Marlin2.0.6, optimized the level of leveling, and changed the screen CFG configuration to the latest 2022 batches.
Screen update instructions: (View the screen production date through the barcode behind the screen. Use the screen firmware of the DWIN20220106 folder before 2022)
1. Format the TF card on the computer, and select 4096 to allocate the size of the unit.
2. Put dwin_set into the memory card.
3. Turn off the printer and insert the memory card into the screen card slot.
4. Restart and wait for the update.
5. After completing the update, remove the TF card and delete the file inside.
Motherboard update:
1. Format the TF card on the computer, and select 4096 to allocate the size of the unit.
2. Put the firmware file "CR-6 SEHW4.5.3SW2.0.920220507.bin" into the memory card (this step is necessary, please note).
3. Turn off the printer and insert the memory card into the machine card slot.
4. Restart and wait for the update.
5. After completing the update, take out the TF card and delete the bin file inside.
Specification:
The file contains: 4.5.2mainboard firmware; 4.5.3mainboard firmware(common with CR-ERA V1.1.0.3mainboard); 2021/9/24 New 9-language firmware: can be flashed in V4.5.3+V1.1.0.3mainboard